rev.a2 www.gulfsemi.com EU02D thru eu02j glass passivated junction ultra fast recovery plastic rectifiers voltage:200 to 600v current: 1.0a feature a-405 low power loss high surge capability glass passivated chip junction ultra-fast recovery time for high efficiency high temperature soldering guaranteed 250 /10sec/0.375 lead length at 5 lbs tension mechanical data terminal: plated axial leads solderable per mil-std 202e, method 208c case: molded with ul-94 class v-0 recognized flame retardant epoxy polarity: color band denotes cathode mounting position: any dimensions in inches and (millimeters) maximum ratings and electrical characteristics (single-phase, half wave, 60hz, resistive or inductive loa d rating at 25 c, unless otherwise stated) symbol EU02D eu02g eu02j units maximum recurrent peak reverse voltage vrrm 200 400 600 v maximum rms voltage vrms 140 280 420 v maximum dc blocking voltage vdc 200 400 600 v maximum average forward rectified current 3/8lead length at ta =55 c if(av) 1.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load ifsm 30 a maximum forward voltage at rated forward current and 25 c vf 1.4 (if=1.0a) v maximum dc reverse current ta =25 c at rated dc blocking voltage ta =125 c ir 10 50 m a m a maximum reverse recovery time (note 1) trr 100 ns typical junction capacitance (note 2) cj 17 15 pf typical thermal resistance (note 3) r(ja) 50 60 c /w storage and operating temperature range tstg, tj -55 to +150 c note: 1. reverse recovery condition if = 0.5a, ir =1.0a, irr =0.25a 2. measured at 1.0 mhz and applied reverse voltage of 4.0vdc 3. thermal resistance from junction to ambient at 3/8lead len gth, p.c. board mounted
1 ratings and characteristic curves EU02D thru eu02j rev.a2 www.gulfsemi.com
|